Excavator Walking Operation In Excavator Teaching

1. Before the operation, we need to first ensure safety, carefully observe the surrounding environment, see whether there are big obstacles on the road, except for the mobile operator, other people should stay away from the excavator to avoid being hurt.

2. Confirm the direction of the excavator's track, which should be the direction of the guide wheel, the direction of the guide wheel and the pedal. The direction of the driving wheel is back, and the pedal is pulling direction.

3. After the preparation work is completed, the operator needs to lift the bucket, remember to honk before walking, and then walk.

4. To control the walking speed of the excavator, you can choose high speed when walking on flat ground, but not too fast. When walking uphill and downhill, you should choose low speed, and pay attention to the rocks and other obstacles on the slope.

5. Special attention should be paid to the fact that when the excavator is walking on the ramp, it should first observe the terrain environment and keep walking straight. The correct way to walk on the slope is to lift the bucket 20-30cm from the ground. If the excavator slips, it must be put down to ensure safety.

6. When the

excavator

is in reverse operation, someone needs to direct it. Pay attention to the blind area behind the excavator and reserve a large space behind the excavator.

7. it must be remembered that dangerous areas can not walk, such as excavators should avoid wading, because the underwater situation is not certain.

www.swaflyengine.com